Stained Glass Cutter, Made in UK Professional 2-in-1 Stained Glass Cutting Tool with Built-in Running Pliers and Carbide Scoring Wheel – So No Reaching for Two Tools, Incl. Step-by-Step Cutting Guide
Product details
| Management number | 213065523 | Release Date | 2026/04/12 | List Price | $15.18 | Model Number | 213065523 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
- STAINED GLASS CUTTER - Watch Stained Glass Cutting Video Read Instructions Download User Guide. Must Soak Stain Glass Cutting Tool Wheel in Glass Cutter Oil, Run Wheel Up And Down A Board To Check Wheel is Spinning So It Can Score Stained Glass Sheets Evenly If Glass Cutting Blade Stops It Will Not Score, A Dry Wheel Will Stick and Drag Across Glass And That Stops it Working Scoring Wheel Must Be Oiled Every Cut. Practice On Scrap Stain Glass Sheet First to Make Sure You Have Got Technique Down.
- HOLD STAINED GLASS CUTTING TOOL – Handles Of Glass Cutter Tool Are Only For Squeezing Glass To Break, Do Not Hold Stain Glass Cutter by Handles When Scoring. Hold Close To Wheel for Best Control And Pressure on Blade. Technique is to Create A Small V In Surface Of Glass Sheet. Scoring Way Too Hard Or Without Oiling Wheel Leaves A Groove And White Dusty Line that Will Not Break On Line Instead Of A Shallow V, The Perfect Stained Glass Score Must Be Just Firm Enough To Leave the V Score in Glass.
- STRAIGHT LINES IN STAINED GLASS – Place Stained Glass Sheet On Board At Waist Height, Scoring on Soft Carpet, Scoring Too Hard or More Than Once Will Cause Glass To Shatter When You Go to Break it. Draw A Line On Glass With A Marker, Follow Line By Pulling Cutter Towards You, Never Push Away, Watch The Back Of The Glass Cutting Wheel to Keep on Line or Use Flat Side Of Glass Cutting Wheel To Run Along Very Smooth Straight Edge Guide At Least 2mm Thick, Guide Can Be Taped Down To Prevent Moving.
- CURVES IN STAINED GLASS – And Wavy Lines Are Possible If Stained Glass Tool Is Held Correctly And Instructions Followed. Draw Shape On Smoothest Side of Glass And Follow The Line With Stain Glass Cutting Tool Wheel. The Glass Cutters Tool Must Be Held Upright And Perpendicular, Lean It Over And It Slides Sideways And Glass Cutter Will Not Cut V In Stained Glass Surface. Smooth Curves Are Ok Sharp Angles Are Not. Deep Curves May Need Squeezing The Score On Stained Glass Gently From Both Sides.
- BREAKING STAINED GLASS – Place Stained Glass Cutting Tools Breaker Of Running Pliers Dead Center Over Scored Line, Lift Glass Sheet, Squeeze Handles Ever So Gently At End. If Gap Is Too Big Fold Breaker Forward By Pivoting It To Make Gap In Between Pliers Small, This Allows You To Squeeze Very Thin Material. Over Squeezing Will Chip Edges. For Radius Cuts Angle Breaker Towards Score Line Dead Center. Cutting Small Strips Is Possible Within Laws Of Physics. Watch Videos If Any Of This Unclear.
| Item Weight | 8.8 ounces |
|---|---|
| Manufacturer | The Amazing Tile And Glass Cutter |
| Item model number | GCBK |
| Product Dimensions | 10 x 7 x 1.5 inches |
| Is Discontinued By Manufacturer | No |
Bestseller ranking
Sales Presentations
Customers who viewed this product also viewed
Racks & Displays
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form