American Swing 2 3/8" Swing Hanger with Shackle Pendulum Commercial or Residential
Product details
| Management number | 215352656 | Release Date | 2026/04/12 | List Price | $17.30 | Model Number | 215352656 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
This is a galvanized ductile iron swing hanger with a shackle pendulum. These hangers are cast in two halves. The lower half of the swing hanger body has a shackle pendulum with a sintered bronze bearing incorporated into it to reduce wear. These bearings do not need to be oiled as the bronze is impregnated with oil. The pendulum is 1” wide and has a shackle with bolt so that there is no need for a connecting S-hook. The shackle pendulum is tamper resistant. It requires an allen wrench with a special pin hole head. The two halves of the hangers are bolted together with a 12mm carriage bolt and a hex lock tight nut. The pendulum is held to the hanger with a #12 axle bolt with a long shoulder, so the bearing does not ride on the threads. It also has a lock tight nut. This hanger fits a standard schedule 40 two inch pipe. This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner. Tensile strength is 5000 lbs.
- Made to fit on a 2 3/8" pipe for a swing set/frame
- Made of ductile iron, that has been galvanized
- Has an anti-theft shackle to connect to the chain of the swing seat
| Item Weight | 2.95 pounds |
|---|---|
| Manufacturer | Jensen Swing Products |
| Is Discontinued By Manufacturer | No |
Bestseller ranking
Shackles
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form