4" Diamond Polishing Pads Wet 800 Grit - Polishing Tile Stone Marble Granite Concrete Ceramics Glass 10Pcs

Polishing instructions: Polishing needs to be cooled by adding water, which will cause less damage to the stone, higher polished gloss, soft and beautiful, and no dust pollution. The water mill can be bent appropriately! :01When operating wet grinding discs, it must be used with the sticking plate installation machine! :02 Water needs to be added when the wet polishing pad is polished! Rough grinding: 50#~100# The grinding disc has obvious grinding marks, which is used to trim the flatness of the grinding material and grind the modeling surface in place. Semi-fine grinding: 200#~300# The rough grinding marks are removed, but new finer lines will be formed, and the machined surface will be polished smoother. Fine grinding: 400#~1000# The pattern, particle and color of the product after fine grinding have been clearly displayed, and the surface is fine and smooth, with a weak gloss. Fine grinding: 1500#~3000# The processed product has no visible traces, the surface is getting smoother and smoother, and the gloss is about 40-50 degrees. The color of the back of the wet polishing pads of different meshes will be different for easy identification 1. Choose a suitable small and thicker grinding disc to start working, and end with a large and thinner. In order to achieve a good grinding effect, it is recommended not to skip the number. ②. Roughly it is not the smoothness of the ground, correctly judge the starting number of grinding, On rough ground, start grinding with a coarser particle size first, otherwise it will take more time to achieve the desired effect. ③. If you find that it takes a lot of time to grind away the scratches, you have to change to a coarser grinding disc, which will save you a lot of time.

• Packing: 10Pcs 4" wet Diamond Polishing Pads 800 grit
• Diameter 100mm, total height 4.5mm, inner hole 12mm, wet polishing, can not be used dry
• polishing the material. Concrete, granite, marble, glass, stone, tile, stone, glass, ceramics, hard plastic, fiberglass, etc.
• The back is made of high-quality cotton, which is easy to be hooked by Velcro,
• When the polishing pad is operated, it must be installed in the angle grinder with the backer pad.