1500w 2000w 2500w 3000w RXG20 ripple resistor,waved ribbon power wire wound resistor,brake resistor,load resistor(40 ohm,3000W)

Resistor Units1500w 2000w 2500w 3000w RXG20 high power ripple resistor,waved ribbon power wire wound resistor,brake resistor,load resistorNote:1. This product is a non-flammable resistor. When it is used for the first time, it may cause smoke. This is normal. Please feel free to use it.2. This resistor non-combustible coating meets the -94 non-combustibility test. V-0 rating, burning duration is 0seconds3. Non-flammable resistors cannot be cleaned with organic solvents4. Non-flammable resistors cannot be used in oil5. Non-flammable resistors cannot be used on high frequency machines because of the inductance generated by the winding group.6. In order to prevent aging over time, please ensure that the power used is within a reasonable range.7. When the non-flammable resistor is at full load, the surface will produce a high temperature of about 350 -400. Please do not touch it by hand, and to ensure that the resistor can be used for a long time, please ensure that the surface temperature of the resistor is lower than 2001.Power Derating Curve:Rated power is the highest using power under 70and continuous duty.at the same time,the overload power is fit formechanical properties and electrical properties,when the temperature is over 70,the power must be derated in accordance with the curve as below:2.About Rating Voltage:The following equation may be used to determine the DC(Direct Current) or AC(Alternating Current)(RMS,root mean square value)of normal rated power.However,if the result value exceeds the max.using voltage,the max.using voltage is to be used:Model Number : 1500w 2000w 2500w 3000wType : wire wound resistor

• Resistor Units
• 1. This product is a non-flammable resistor. When it is used for the first time, it may cause smoke. This is normal. Please feel free to use it.
• 2. This resistor non-combustible coating meets the -94 non-combustibility test. V-0 rating, burning duration is 0seconds
• 3. Non-flammable resistors cannot be cleaned with organic solvents
• 4. Non-flammable resistors cannot be used in oil
• 5. Non-flammable resistors cannot be used on high frequency machines because of the inductance generated by the winding group.